5 Tips For Using Hitch Mount Bike Rack

A hitch mount bike rack is the most stable and secure carrier you can use to transport your bikes. They use the towing hitch on a vehicle to mount onto it. So that all of the weight is distributed evenly across both axles of your vehicle. This reduces stress on tires and makes it easier to control your vehicle when hauling bikes. In addition, most hitches have built-in locking mechanisms that keep thieves from stealing your bikes while mounted on top of your vehicle.

Put mountain bikes on the bottom.

You should always put your most expensive bike on the bottom. If you don’t, it will be more likely to get damaged or stolen. Mountain bikes are heavier than other types of bicycles, so they need special attention when transported by a hitch-mounted bike rack. In addition, they have many different parts. As a result, it can be more vulnerable to damage in transit and take up more space in an already crowded car trunk or SUV cargo area. 

To prevent this from happening, attach all of them securely with straps before placing them into the wheel cradle arms of your rack. This way, nothing will shift around as you drive down the road!

Place wheel hooks in the right place.

When using a hitch mount bike rack, it’s important to ensure that the wheel hooks are in the right place and tightened correctly. If they’re not, your bikes can slide around while driving, and they might even fall off.

To get the best results from your hitch mount bike rack, make sure that:

  • You can place the wheel hooks on both sides of each tire, one for each side.
  • They’re connected enough to hold their position but not so tightly as to damage them or cause undue stress.

Do not exceed the weight limit on your hitch.

Do not exceed the weight limit on your hitch. The manufacturer of your vehicle provides a maximum weight capacity for the hitch. For example, suppose you have a 2″ receiver. In that case, we suggest using no more than 200 lbs per bike when using our Hitch Mounted Bike Racks. If your vehicle has a 1-1/4″ receiver or smaller, then we suggest no more than 125 lbs per bike when using our Hitch Mounted Bike Racks.

Make sure to secure your bikes.

A locking hitch pin is an ideal way to ensure your bike remains in place, but you’ll have to make sure the rack is locked and then lock your bike onto it, too. You can also use a cable in conjunction with a locking hitch pin if you prefer not to use one at all times. Instead, use a rack that fits into the receiver tube of your vehicle’s trailer hitch (or tow hitch).

Lock all bikes and racks.

Make sure all bikes and the rack are locked. If you’re parking in an area where someone could quickly hop into your car and steal your bikes, then you should lock them down. But even if it’s just behind your house, locking them up can help keep them from getting stolen. 

Don’t haul fork mount bike racks with wheels mounted. When you’re hauling a bicycle, you’ll want to ensure it’s mounted on the rack. If the wheels are attached, they may damage other parts of the bike or your vehicle. You could also scratch up your hitch or cause damage to the rack itself.

Conclusion

As you can see, there are many things you need to think about when it comes to finding the best hitch mount bike rack. We hope these tips will help you choose the right one for your needs!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button