How to Clean the Air Filter on a Briggs and Stratton Lawn Mower

Every spring, lawnmowers are a household essential. But after a season of use, the air filter on the Briggs and Stratton lawn mower can become clogged with dirt and debris. If this occurs, you may experience the less-than-ideal performance from your machine. If this is the case, you’ll want to clean the filter on your Briggs and Stratton lawnmower to restore full functionality. It’s an easy process that can be done in just a few minutes!

What is the Briggs and Stratton air filter?

The Briggs and Stratton air filter is used to prevent debris from getting into your engine. It’s designed specifically for use with Briggs and Stratton gas lawn mowers. The air filter is located in the back of the engine, where it can be accessed from underneath the machine.

If you experience performance issues after cleaning your filter, or if you want to make sure it’s in good working order, you’ll want to clean it! This process will involve removing the air filter cover and using compressed air or a vacuum cleaner to blow out any clogs. Once that’s done, replace the cover and give your engine a quick test run before storing your outdoor equipment away for the season. You can easily solve this big problem with the help of kyle’s heating and air solution.

How to clean the air filter on a Briggs and Stratton lawn mower

First, you’ll need to use a screwdriver to remove the screws on the bottom of the air filter. Once these are removed, you can take off the cover and clean out all of the dirt and debris accumulated inside it.

Use a vacuum cleaner to clean out all of the debris inside the filter. You should see what’s inside if you look closely easily enough.

Once everything is cleaned out, put everything back together in reverse order. Screw your new cover back on tightly and place the screws back in their original slots. Reattach your plug and start using your Briggs and Stratton lawnmower again!

Why it’s important to clean your air filter.

The air filter is an important part of your Briggs and Stratton lawn mower, so it’s important to take care of it. The air filter protects the engine from dirt and debris that might cause damage. It also prevents the engine from overheating when you’re pushing the machine too hard.

Cleaning your air filter helps restore full functionality to your Briggs and Stratton lawn mower. It also has a positive impact on performance. If you want to get the most out of your machine, clean the filter at least once per season.

How often should you clean your air filter?

The air filter on a Briggs and Stratton lawn mower can become clogged with dirt and debris throughout the season. If this occurs, your engine may not put out as much power. It’s easy to clean, though—follow these steps!

First, you’ll need to take off the air filter cover. Then, disconnect the plug for the engine from the plug for the electrical system in your machine. After this, you’ll insert a screwdriver into the hole on the side of each plastic piece and remove them from their respective pieces of metal. Next, detach all three bolts connecting each piece of metal with a wrench. Now that they’re apart, you can remove each piece of metal connected to it. Remove the debris from around each piece by wiping it down with a rag or towel soaked in soapy water or washing solution.

Now that everything is clean, replace all three pieces of metal into their respective holes and reattach them to each other with all three bolts using a wrench. Replace the air filter cover and reconnect your plug for both systems once more before starting up your lawn mower again!


Cleaning the air filter on a Briggs and Stratton lawnmower is easy and doesn’t take much time. It’s an important step in keeping your mower in good working order, so make sure you follow the instructions below to keep your mower running smoothly.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button